If you live on or have a remote property you possibly have a lack of fresh water most times of the year or make use of high-mineral content bore water for your personal needs.

 

Wouldn't it be great if there was a solution available where you could make near unlimited fresh water for your property? We now have those solutions and use our marine technologies to handle high-salinity bore water. Sea water is approximately 32,000 parts per million (ppm). Bore water is anywhere from 1,000 to 15,000 ppm.

 

It's quite simple. We swap out the fresh water flush system which isn't required for bore water for a Davey XF171S pump to draw the bore water from your storage tank, process it through the remaining "marine" membrane system and it produces beautiful fresh water for your needs. The rest of the system remains the same.

​

There is another output from the system - brine. This is approximately a 1:1 ratio. For every litre of fresh water you will have a litre of brine to dispose of. This can be run into a dam for irrigation, run to the local creek or put back into the water table with a shallow 'in' bore.

​

Plumb the fresh water output of the system into your fresh water storage tank and you have all you need.

​

Our smallest system produces approximately 100 litres per hour. We also have 200 and 300 lph solutions.

​

The system uses approximately 1,650w of electricity. If you have solar and run the system during the day when the panels are producing - then you truly have water with no ongoing costs.

​

The membranes will last up to 10 years with proper care. There may be the need to give them an acid bath from time to time (every year or three) to disolve any molecules trapped in the membranes but this is an easy process or can be done at www.rowater.com.au based in Adelaide.

​